Genuine
Sugi Hara Platinum Sprocket Nose Bar 20" .325" .058 80DL
Key Features
- Professional premium bar
- Replaceable sprocket nose
- Fitment in specifications below
Specifications
| Description: | PROKUT PLATINUM SUGIHARA 20 x .325" x .058" x *80 DL, BB Mount, Solid Professional |
|---|---|
| Replaceable Sprocket Nose Guide Bar - Made In Japan | |
| Replaces OEM: | Oregon 208RNBK095 |
| Sugihara - Diatop BC3T-8J50-A | |
| Features: | Professional premium quality, solid, replaceable sprocket nose guide bar. |
| Replaces OEM: | Husqvarna 582 08 69-80, |
| Oregon 208RNBK095 | |
| Sugihara - Diatop BC3T-8J50-A | |
| Nose fastens with three rivets, and is securely held by wide and strong overlapping | |
| ears. | |
| The long sprocket nose takes most of the abuse, and minimizes wear to the bars | |
| body. | |
| Super tough steel, heat treated up to 4 times on different parts of the guide bar, | |
| provides superior bar-body strength and tough rails with excellent resistance to | |
| wear and chipping. | |
| PROKUT Platinum Sugihara guide bar rails measure HRC60 on a hardness scale. | |
| Made in Japan. | |
| All PROKUT guide bars are reversible for longer life. | |
| Features: | Professional premium quality, solid, replaceable sprocket nose guide bar. |
| Manufactured from a single piece of steel, featuring superior durability and | |
| stiffness characteristics. | |
| High durability sprocket nose. | |
| Polished lacquered finish. | |
| Nose fastens with three rivets, and is securely held by wide and strong overlapping | |
| ears. | |
| The long sprocket nose takes most of the abuse, and minimizes wear to the bars | |
| body. | |
| Super tough steel, heat treated up to 4 times on different parts of the guide bar, | |
| provides superior bar-body strength and tough rails with excellent resistance to | |
| wear and chipping. | |
| PROKUT Platinum Sugihara guide bar rails measure HRC60 on a hardness scale. | |
| Made in Japan. | |
| All PROKUT guide bars are reversible for longer life. | |
| Length: (in): | 20" |
| Length: (in): | 20" |
| Length: (cm): | 50 cm |
| Pitch: | .325" |
| Bar Type: | PROKUT Platinum Sugihara Series, Solid Professional Replaceable Sprocket Nose Guide Bar |
| Chain / Cutter Type: | 38S / Semi-Chisel or 38F / Full-Chisel |
| Bar Mount Type: | BB |
| Gauge: | .058" |
| Drive Link Count: | *80 (*please refer to notes after each fitment application) |
| Teeth: | 11 Tooth sprocket nose |
| Recommended Saw Sizes: | 38 cc to 62 cc (2.3 to 3.8 cu. in.) |
| drive link chains from new. This guide bar uses an 80 drive link chain and so the | |
| existing chain will require lengthening (or replacing) to use this PROKUT Platinum | |
| Sugihara guide bar on these applications. | |
| Fits: | *Alpina 460, 510, 540 and 550 models. *Please note these models were fitted with 78 |
| drive link chains from new. This guide bar uses an 80 drive link chain and so the | |
| existing chain will require lengthening (or replacing) to use this PROKUT Platinum | |
| Sugihara guide bar on these applications. | |
| lengthening (or replacing) to use this PROKUT Platinum Sugihara guide bar on these | |
| applications. Note: Please check your saw carefully prior to ordering, some of the | |
| above saw models were also released fitted with a 3/8" pitch chain. PS410 After | |
| Serial # 34576 & PS411 After Serial # 33571 use NARROW CUT only. | |
| Fits: | *Dolmar 109, 109HS, 110, 110i, 111, 111i, 115, 115i, PS-410, PS-411, PS-460, |
| PS-510, PS-540, PS-5000 D, PS-5100 S, PS-5105 and PS-5105 H model chainsaws. | |
| *Please note these models were fitted with 78 drive link chains from new. This | |
| guide bar uses an 80 drive link chain and so the existing chain will require | |
| lengthening (or replacing) to use this PROKUT Platinum Sugihara guide bar on these | |
| applications. Note: Please check your saw carefully prior to ordering, some of the | |
| above saw models were also released fitted with a 3/8" pitch chain. PS410 After | |
| Serial # 34576 & PS411 After Serial # 33571 use NARROW CUT only. | |
| RANCHER, 455 RANCHER, 460, 460 RANCHER, 466, 543 XP, 543 XPG, 545, 550 XP, 550 XPG, | |
| 555, 560 XP, 560 XPG, 1200 Electric 1400 Electric, 1500 Electric, 1600 Electric, | |
| 1800 Electric and H318 model chainsaws. *Please note these models were fitted with | |
| 78 drive link chains from new. This guide bar uses an 80 drive link chain and so | |
| the existing chain will require lengthening (or replacing) to use this PROKUT | |
| Platinum Sugihara guide bar on these applications. | |
| Fits: | *Efco 141SP, 147, 152, 156, 165 and MT 5200 model chainsaws. *Please note these |
| models were fitted with 78 drive link chains from new. This guide bar uses an 80 | |
| drive link chain and so the existing chain will require lengthening (or replacing) | |
| to use this PROKUT Platinum Sugihara guide bar on these applications. | |
| Fits: | *Fairmont Hydraulic 38568, 43177, 43178, HCS513, HCS516, HCS520, HPS513 and |
| LIMBLOPPER model chainsaws. *Please note these models were fitted with 78 drive | |
| link chains from new. This guide bar uses an 80 drive link chain and so the | |
| existing chain will require lengthening (or replacing) to use this PROKUT Platinum | |
| Sugihara guide bar on these applications. | |
| uses an 80 drive link chain and so the existing chain will require lengthening (or | |
| replacing) to use this PROKUT Platinum Sugihara guide bar on these applications. | |
| Fits: | *Husqvarna 33, 40, 41, 42, 44, 45, 49, 50, 51, 55, 55 RANCHER, 57, 133, 140, 154, |
| 234, 238, 240, 242, 242 XP, 246, 254, 254 XP, 257, 261, 262, 262 XP, 336, 339 XP, | |
| 340, 340 e, 345, 345 e, 346, 346 XP, 346 XP E-TECH, 346 XPG, 350, 350 e, 351, 353, | |
| 353 E-TECH, 353 G E-TECH, 357 XP, 357 XPG, 359, 359 E-TECH, 360, 362, 362XP, 435, | |
| 435 e, 440 e, 444, 445, 445 e, 450, 450 50TH ANNIVERSARY, 450 e, 455, 455 e | |
| RANCHER, 455 RANCHER, 460, 460 RANCHER, 466, 543 XP, 543 XPG, 545, 550 XP, 550 XPG, | |
| 555, 560 XP, 560 XPG, 1200 Electric 1400 Electric, 1500 Electric, 1600 Electric, | |
| 1800 Electric and H318 model chainsaws. *Please note these models were fitted with | |
| 78 drive link chains from new. This guide bar uses an 80 drive link chain and so | |
| the existing chain will require lengthening (or replacing) to use this PROKUT | |
| Platinum Sugihara guide bar on these applications. | |
| Sugihara guide bar on these applications. | |
| Fits: | *Jonsered 45, 49, 50, 51, 52, 370, 410, 420, 425, 435, 450, 451, 455, 510, 521, |
| 525, 535, 2050, 2050 TURBO, 2051, 2054, 2055, 2149, 2149 TURBO, CS2141, CS2141S, | |
| CS2145, CS2145S, CS2149 TURBO, CS2150, CS2152 W, CS2153, CS2156, CS2159, CS2159C, | |
| CS2159WH, CS2163, CS2240, CS2245, CS2250, CS2250S and CS2255 model chainsaws. | |
| *Please note these models were fitted with 78 drive link chains from new. This | |
| guide bar uses an 80 drive link chain and so the existing chain will require | |
| lengthening (or replacing) to use this PROKUT Platinum Sugihara guide bar on these | |
| applications. Note: Please check your saw carefully prior to ordering, some of the | |
| above saw models were also released fitted with a 3/8" pitch chain. | |
| Fits: | *Makita DCS 430, DCS 431, DCS 460, DCS 510, DCS 520i, DCS 540, DCS5121 and DCS |
| 5200i model chainsaws. *Please note these models were fitted with 78 drive link | |
| chains from new. This guide bar uses an 80 drive link chain and so the existing | |
| chain will require lengthening (or replacing) to use this PROKUT Platinum Sugihara | |
| guide bar on these applications. Note: Please check your saw carefully prior to | |
| ordering, some of the above saw models were also released fitted with a 3/8" pitch | |
| chain. | |
| Fits: | *Makita DCS410, DCS411, DCS430 model chainsaws. *Please note these models were |
| fitted with 78 drive link chains from new. This guide bar uses an 80 drive link | |
| chain and so the existing chain will require lengthening (or replacing) to use this | |
| PROKUT Platinum Sugihara guide bar on these applications. Note: DCS410 After Serial | |
| # 34576 & DCS411 After Serial # 33661 use NARROW CUT only. | |
| Fits: | *McCulloch 1849 AV, 2046 AV, 2049 AV, 4600, 4700, 4900, 5000, 5500, MAC 2818 AV, MS |
| 1846 AV, MS 1849 AV, MS 1850, MS 2046 AV, MS 2046 AVCC, MS 2049, MS 2049 AV, MS | |
| 2049 AVCC, MS2050, PM 1845 AV, Pro Mac: 40, 46. PM4300, PM4700, PM5000, PM5200, | |
| SILVER EAGLE: 2818, 3020 and TIMBER BEAR 20 (later models) model chainsaws. *Please | |
| note these models were fitted with 78 drive link chains from new. This guide bar | |
| uses an 80 drive link chain and so the existing chain will require lengthening (or | |
| replacing) to use this PROKUT Platinum Sugihara guide bar on these applications. | |
| Fits: | *MTD 152 model chainsaws. *Please note these models were fitted with 78 drive link |
| chains from new. This guide bar uses an 80 drive link chain and so the existing | |
| chain will require lengthening (or replacing) to use this PROKUT Platinum Sugihara | |
| guide bar on these applications. | |
| Sugihara guide bar on these applications. | |
| with a 3/8" pitch chain. | |
| Fits: | *Oleo-Mac 925F, 938, 940C, 941, 941 CX, 942, 945, 946, 947, 947F, 950, 951, 952, |
| 956 and 962 model chainsaws. *Please note these models were fitted with 78 drive | |
| link chains from new. This guide bar uses an 80 drive link chain and so the | |
| existing chain will require lengthening (or replacing) to use this PROKUT Platinum | |
| Sugihara guide bar on these applications. | |
| on these applications. | |
| Fits: | *Opem K1 and K2 model chainsaws. *Please note these models were fitted with 78 |
| drive link chains from new. This guide bar uses an 80 drive link chain and so the | |
| existing chain will require lengthening (or replacing) to use this PROKUT Platinum | |
| Sugihara guide bar on these applications. | |
| Fits: | *Parklander GL4500M-18 model chainsaws. *Please note these models were fitted with |
| 78 drive link chains from new. This guide bar uses an 80 drive link chain and so | |
| the existing chain will require lengthening (or replacing) to use this PROKUT | |
| Platinum Sugihara guide bar on these applications. | |
| Fits: | *Partner 360, 400, P-360, P-400, P-450, P-500 and P-5000 model chainsaws. *Please |
| note these models were fitted with 78 drive link chains from new. This guide bar | |
| uses an 80 drive link chain and so the existing chain will require lengthening (or | |
| replacing) to use this PROKUT Platinum Sugihara guide bar on these applications. | |
| Fits: | *Pioneer 1074, P-21, P-26 and P-28 model chainsaws. *Please note these models were |
| fitted with 78 drive link chains from new. This guide bar uses an 80 drive link | |
| chain and so the existing chain will require lengthening (or replacing) to use this | |
| PROKUT Platinum Sugihara guide bar on these applications. | |
| Fits: | *Poulan / Poulan Pro 325 and PP5118 model chainsaws. *Please note these models were |
| fitted with 78 drive link chains from new. This guide bar uses an 80 drive link | |
| chain and so the existing chain will require lengthening (or replacing) to use this | |
| PROKUT Platinum Sugihara guide bar on these applications. | |
| Fits: | *Redmax G390, G450AVS, G455AVS, G5000, G5000AVS and G5300 model chainsaws. *Please |
| note these models were fitted with 78 drive link chains from new. This guide bar | |
| uses an 80 drive link chain and so the existing chain will require lengthening (or | |
| replacing) to use this PROKUT Platinum Sugihara guide bar on these applications. | |
| sprocket nose guide bar option use our part number GAFBB2038PL (which uses a 78 | |
| drive link chain. Use this guide bar with our semi-chisel chain loop part number | |
| GAF38S078DL or our full-chisel chain loop part number GAF38F078DL). For a bar and | |
| chain combo option containing a semi-professional laminated multi-rivet sprocket | |
| nose guide bar and 78 drive link semi-chisel chain use our part number GAF105714. | |
| Replaces our part number OMK208RNBK095 | |
| Fits: | *Ryobi RFS4518 and RFS5418 model chainsaws. *Please note these models were fitted |
| with 78 drive link chains from new. This guide bar uses an 80 drive link chain and | |
| so the existing chain will require lengthening (or replacing) to use this PROKUT | |
| Platinum Sugihara guide bar on these applications. | |
| Fits: | *Sina SCS4500I model chainsaws. *Please note these models were fitted with 78 drive |
| link chains from new. This guide bar uses an 80 drive link chain and so the | |
| existing chain will require lengthening (or replacing) to use this PROKUT Platinum | |
| Sugihara guide bar on these applications. | |
| Fits: | *Solo 613, 614, 631, 632, 634, 638, 639, 641, 644, 645, 647, 650, 651, 651 SP, 652, |
| 654, 656 and 656 SP model chainsaws. *Please note these models were fitted with 79 | |
| drive link chains from new. This guide bar uses an 80 drive link chain and so the | |
| existing chain will require lengthening (or replacing) to use this PROKUT Platinum | |
| Sugihara guide bar on these applications. | |
| Fits: | *Stanley Hydraulic CS05 and CS06 model chainsaws. *Please note these models were |
| fitted with 78 drive link chains from new. This guide bar uses an 80 drive link | |
| chain and so the existing chain will require lengthening (or replacing) to use this | |
| PROKUT Platinum Sugihara guide bar on these applications. Note: Please check your | |
| saw carefully prior to ordering, some of these saw models were also released fitted | |
| with a 3/8" pitch chain. | |
| Fits: | *Tanaka ECV 5601 model chainsaws. *Please note these models were fitted with 78 |
| drive link chains from new. This guide bar uses an 80 drive link chain and so the | |
| existing chain will require lengthening (or replacing) to use this PROKUT Platinum | |
| Sugihara guide bar on these applications. | |
| Fits: | *Zenoah G390, G450AVS, G455, G455AVS, G500, G5000, G5000AVS and G5300 model |
| chainsaws. *Please note these models were fitted with 78 drive link chains from | |
| new. This guide bar uses an 80 drive link chain and so the existing chain will | |
| require lengthening (or replacing) to use this PROKUT Platinum Sugihara guide bar | |
| on these applications. | |
| Standard Pack Quantity: | 1 |
| Please Note: | For a standard PROKUT solid professional replaceable sprocket nose guide bar option |
| use our part number GAFBB2038RS (which uses a 78 drive link chain. Use this guide | |
| bar with our semi-chisel chain loop part number GAF38S078DL or our full-chisel | |
| chain loop part number GAF38F078DL). For a semi-professional laminated multi-rivet | |
| sprocket nose guide bar option use our part number GAFBB2038PL (which uses a 78 | |
| drive link chain. Use this guide bar with our semi-chisel chain loop part number | |
| GAF38S078DL or our full-chisel chain loop part number GAF38F078DL). For a bar and | |
| chain combo option containing a semi-professional laminated multi-rivet sprocket | |
| nose guide bar and 78 drive link semi-chisel chain use our part number GAF105714. | |
| Replaces our part number OMK208RNBK095 | |
| Brand: | PROKUT PLATINUM SUGIHARA, GA Forestry Accessories |
| Product Line: | Bar, guide bar, solid professional replaceable sprocket nose guide bar, sprocket |
| nose guide bar, |
Prokut Platinum Sugi Hara Sprocket Nose Bar 20 #38 Bb
Related Products
Genuine